How to Install Bath Safety Strips and Discs
By Manage At Home | Published: 2026-10-24
Category: How-to Guides
Learn how to install bath safety strips and discs for a secure, non-slip tub. Follow our simple steps for a firm grip and lasting adhesion.
Quick Answer
For a safer bathtub, clean and dry the surface, then firmly press adhesive-backed bath safety strips or discs onto the tub floor. Position them where you step and stand for the best anti-slip protection.
Why Placement Matters
Bath safety strips and discs work best when placed exactly where your feet make contact with the tub. That means the area you step onto when entering and the spot where you stand while showering. Placing them randomly reduces their effectiveness and can create a false sense of security.
Consider the shape and size of your bathtub. Strips are ideal for covering long, narrow areas, while discs offer flexible coverage for curved or irregular surfaces. The Tenura Bath Safety Strips & Discs come in a 3-metre roll, giving you enough material to customize placement to your tub's specific layout.
The Trade-off: Strips vs. Discs
Strips provide continuous coverage, which some users find more reassuring, especially if you tend to slide. Discs, on the other hand, allow for targeted placement and can be arranged to match your stance more precisely. Both offer strong adhesion, but you might prefer one over the other based on how your tub is shaped and where you need the grip most.
Step-by-Step Installation
- Clean the Tub Surface: Thoroughly clean the area where you'll place the strips or discs. Use a mild cleaner to remove soap scum, oils, and residue. Rinse well and let it dry completely. A clean, dry surface is essential for strong adhesion.
- Dry the Area Completely: After cleaning, wipe the tub with a dry cloth and allow it to air dry for at least an hour. Any moisture left behind can prevent the adhesive from bonding properly. Check that the surface is completely dry before proceeding.
- Plan Your Placement: Decide where you need the grip most—typically where your feet land when stepping in and where you stand while showering. Mark the spots lightly with a pencil if needed. Visualize your footing to avoid placing strips in low-traffic areas.
- Cut the Strips or Discs to Size: If using strips, measure and cut them to the desired lengths. For discs, you can use them as they are or cut them to fit tight spaces. Always cut with sharp scissors for a clean edge. Cutting to fit ensures full coverage without waste.
- Peel and Press Firmly: Remove the backing and press the strip or disc firmly onto the tub. Apply even pressure from the center outward to eliminate air bubbles. Hold for a few seconds to ensure a secure bond. Firm pressure helps the adhesive grip immediately.
- Wait Before Using the Tub: Allow the adhesive to cure for at least 24 hours before using the tub. Avoid getting the strips or discs wet during this time. Patience here prevents peeling and extends the life of your bath safety aids.
Products That Help
- Tenura Bath Safety Strips & Discs - Clear: These bath safety strips and discs are perfect for all bath shapes and sizes and are adhesive backed for easy installation. You can cut and place them to match your tub's exact contours, ensuring a custom anti-slip setup.
Tenura Bath Safety Strips & Discs - Clear - Tenura Bath Safety Strips & Discs - White: These bath safety strips and discs are supplied as a 3 metre roll, giving you plenty of material to cover key areas. A single roll provides enough coverage for most tubs, so you won't need to buy multiple packs.
Tenura Bath Safety Strips & Discs - White
