Start by measuring the threshold, not the door
Before you choose a ramp, measure the height of the lip you need to clear and the width of the doorway. For a threshold lip ramp, you also need to know the depth of the threshold. Use a tape measure and write down the numbers in millimetres or inches. If you use a wheelchair or scooter, check the ground clearance and the wheelbase; a ramp that is too short or too steep can cause the chair to scrape or tip.
The three ramps in this guide solve different problems. The Threshold Ramps (product ID 3299571) are aluminium ramps that bridge over a door threshold and are narrow enough for most doorways. The Threshold Lip Ramp (product ID 3299570) is a lightweight, portable ramp with anti-slip rubber pads and a carry handle, suitable for indoor and outdoor use. The Doorline-Threshold Wedge (product ID 3299569) is designed for lower steps and thresholds and comes in a range of heights with an all-weather grip surface.
How to fit a threshold ramp
These steps apply to the Threshold Ramps and the Threshold Lip Ramp. The Threshold Lip Ramp requires no installation, so you can place it directly. The Threshold Ramps are aluminium and bridge the lip; the supplied information does not include fixing instructions, so check the product record for any additional guidance before permanent placement.
- Clear the doorway: Remove any mats, rugs, or debris from the threshold and the floor on both sides. The ramp needs a clean, flat surface to sit on.
- Position the ramp: Place the ramp so that the sloped side faces the direction of travel. For the Threshold Lip Ramp, the anti-slip rubber pads should sit flat on the floor. For the Threshold Ramps, ensure the ramp bridges the lip without rocking.
- Check for stability: Press down on the ramp with your foot or hand. It should not move or wobble. If it does, adjust the position or check that the floor is level.
- Test with the intended user: Have the wheelchair, scooter, or walker user approach slowly the first time. Watch for any scraping or instability. The Threshold Lip Ramp's carry handle makes it easy to reposition if needed.
When a wedge is the better choice
A doorway threshold wedge, like the Doorline-Threshold Wedge, is useful when you have a lower step or a threshold that is too high for a simple bridge ramp. It is available in heights from 1.5" to 6", so you can match the wedge to the height you measured. The wedge is strong, lightweight, and quick to deploy, and its all-weather grip surface makes it suitable for outdoor doorways as well as indoor ones. Because it is a wedge rather than a bridge, it may be more suitable for temporary or semi-permanent use, but the supplied information does not specify load limits or fixing methods, so check the product record for any additional details.
Product facts to guide your choice
- Threshold Ramps: These aluminium threshold ramps provide a solution to problems caused by door thresholds by bridging over the lip and allowing for smooth transit. Narrow enough for most doorways. This ramp is a good starting point if you need a permanent or semi-permanent bridge over a standard door threshold and have a narrow doorway.

Threshold Ramps - Threshold Lip Ramp: The Threshold Lip Ramp provides a smooth entrance to door thresholds and is suitable for both indoor and outdoor use. Extremely lightweight for quick and easy use and no install required. Features anti slip rubber pads and a convenient carry handle. Choose this if you need a portable ramp you can move between doorways or take with you. The carry handle and no-install design make it easy to reposition.

Threshold Lip Ramp - Doorline-Threshold Wedge: These ramps are designed for overcoming lower steps and thresholds and are available in a range of heights. They are strong lightweight and easy and quick to deploy and feature an all-weather grip surface. This wedge is the right pick when your threshold is higher or you need to clear a small step. The range of heights lets you match the wedge to your measurement.
Matching the ramp to your wheelchair or scooter
For a wheelchair or mobility scooter, the key measurements are the threshold height and the doorway width. The Threshold Ramps are narrow enough for most doorways, but check the width of your chair or scooter against the ramp width. The Threshold Lip Ramp comes in two lengths (584 mm and 787 mm), which affects how gradual the slope is; a longer ramp gives a gentler transition. The Doorline-Threshold Wedge comes in heights from 1.5" to 6", so you can choose a height that matches your threshold without creating a steep approach. The supplied information does not include maximum load ratings or recommended slope angles, so if you are unsure, consult the product record or seek advice from a mobility specialist.
Safety checks before each use
These checks are based on the features described in the supplied product information. They are not a substitute for professional assessment.
- Check the ramp is secure: Make sure the ramp has not shifted. The Threshold Lip Ramp's rubber pads should be clean and in contact with the floor.
- Look for wear: Inspect the ramp for cracks, bends, or worn grip surfaces. The Doorline-Threshold Wedge has an all-weather grip surface; replace it if the grip becomes smooth.
- Keep the approach clear: Ensure no obstacles are on the ramp or immediately in front of it.
- Use a slow, steady approach: For wheelchair and scooter users, approach the ramp straight on and at a low speed. For walkers, take careful steps and use any handrails available.




